Knowledge United

Our voice network labs use the latest hardware and software:

• Troubleshoot Cisco's new ISR routers: 2811s are used throughout the network
• Gain experience with recent stable IOS release: 12.3.14T3
• Configure CallManager 4.1
• Explore router DSP configuration: PVDM2-32 cards in every 2811 router
• Every router has 2xFXS, 2xFXO, and 2xT1 ports (PRI and T1-CAS) as well as serial ports for WAN connectivity

And just like in a real network:

• The same simulated PSTN is accessible through both PRI and FXO ports
• The same simulated PSTN is accessible through all four clusters providing failover scenarios for bandwidth and connectivity problems
• Different area codes are deployed at all sites (two per cluster)

All of our IP Telephony courses provide a simulated PSTN

• Deploy Cisco CallManager 4.1
• Every pod has internal and external phones
• Build and test a real dial plan including:
  • 911
  • 3-digit service codes: 411, 511, etc.
  • 7-digit local numbers: 681-1901
  • 10-digit local numbers: 416-681-1901
  • 11-digit long distance: 1-733-802-1901
  • International: 011441902

Build and test a real CoS solution that allows:

• Internal dialing
• Local dialing
• Long distance dialing
• International dialing
• Configure routing for FXS ports
• Configure connections to simulated PBXs via T1-CAS:
  • 2-PBXs connected via multiplexer
  • Configure DSO-groups connecting to 2 different PBXs
  • Test calls from PBX to 911, service codes, local, long distance, and international numbers
• Configure a multisite centralized model:
  • HQ calls route out PRI
  • Branch A calls route out FXO ports
• Our labs are almost entirely pre-wired
  • Focus on CallManager and router configuration, not endless rewiring of an ad hoc network!

CIPT 2 value adds:

• Preventing toll fraud
• Time of Day Routing
• Forced Authority Codes

All the other CIPT 2 labs are included:

• Locking down windows and the CallManager
• Encryption and authentication
• Video
• CDR and the CDR Administrative Reporting Tool
• The Real-Time Monitoring Tool
• Troubleshooting using trace files and the Dialed Number Analyzer

Our CIPT 2 labs are focused on Call Manager Administration:

• Our labs are almost entirely pre-wired so the focus is on CallManager configuration, not endless rewiring
• No router experience is required: you do not need to know Cisco's router command line interface

Mini Camp Hours

Class begins each day at 8:00 AM and may extend until 8:00 PM.

Note: Students should expect class to run late into the evening on most days. In a typical Mini Camp, it is not uncommon for some students to remain past 8:00 PM depending upon the class size and experience of the students.

Exam Voucher Included with the Mini Camp:

• (1) 642-444 CIPT

Who Needs to Attend

Network professionals who install, configure, and manage Cisco IP Telephony solutions, deploy video on their IP Telephony networks, and need to properly secure their networks. Technical professionals pursuing CCVP certification or the Cisco IP Telephony Support and/or Operations Specialist Certification.